medium carbon steel
英 [ˈmiːdiəm ˈkɑːbən stiːl]
美 [ˈmiːdiəm ˈkɑːrbən stiːl]
中碳钢
双语例句
- The initiation and growth of part through and through cracks in blunt notched specimens of a medium carbon steel were investigated by a replication technique.
采用复型方法对中碳结构钢单边钝缺口试样的非穿透和穿透疲劳短裂纹的演化过程进行了研究。 - Influence of Cu and RE on Cast-penetrated Layer on Medium Carbon Steel
铜及稀土元素对中碳钢铸渗层组织性能的影响 - Modelling and Control of Dynamic Secondary Cooling and Soft Reduction in Continuous Slab Casting Optimization of dynamic secondary cooling technology in the control of center segregation of medium carbon steel slab
板坯连铸动态二冷与轻压下建模及控制的研究减轻铸坯中心偏析的动态二冷技术优化 - Devitrification of Mold Flux Glassy Film for Medium Carbon Steel Slab fiber glass reinforced thermoplastics
中碳钢板坯保护渣玻璃质渣膜脱玻化玻璃纤维增强热塑性塑料，热塑性玻璃钢 - Research on Structure and Properties of Alloyed Layer by Cast Penetrating on Medium Carbon Steel Surface
中碳钢表面铸渗合金化层组织和性能研究 - The equations suit not only ferrite and pearlite in microalloyed medium carbon steel but also pearlite in high carbon microalloyed steel and ferrite in low carbon microalloyed steel.
该方程不仅适合微合金中碳钢的铁素体和珠光体组织，而且也适合高碳微合金钢的珠光体组织和低碳微合金钢的铁素体组织。 - Study on Optimization of Mold Powder for Medium Carbon Steel Slab Casting and Plant Trial With Optimized Flux for Increasing Casting Speed
中碳钢板坯保护渣性能优化及提高拉速工业试验研究 - An oil lamp with a glass chimney and perforated metal lid to protect the flame from high winds; candlestick with a glass chimney. Devitrification of Mold Flux Glassy Film for Medium Carbon Steel Slab
一种有玻璃灯罩和金属穿孔板防止大风吹熄火焰的油灯；有玻璃灯罩的烛台。中碳钢板坯保护渣玻璃质渣膜脱玻化 - 2-dimensional finite element method for cathodic protection of copper by medium carbon steel in seawater
中碳钢在海水中阴极保护紫铜的二维有限元法计算研究 - Research on the Simulation of Microstructure for Medium Carbon Steel and Stainless Steel during Continuous Casting Process
中碳钢和不锈钢连铸过程凝固微观组织模拟研究 - Study on secondary cool dynamic controlling model of continuous casting for medium thickness slab Optimization of dynamic secondary cooling technology in the control of center segregation of medium carbon steel slab
中薄板坯连铸二冷动态控制模型的研究减轻铸坯中心偏析的动态二冷技术优化 - Investigation on Fatigue Notch Factor for Medium Carbon Steel under Axial Loading
轴向加载条件下中碳钢疲劳缺口系数的研究 - Application of dynamic soft reduction technology in the control of centerline segregation of medium carbon steel slab
动态轻压下在中碳钢铸坯中心偏析控制中的应用 - Analysis of Mixture Structure and its Mechanical Properties for Medium Carbon Steel
中碳钢混合组织及其力学性能的研究 - Based on the experimental observations of the high-speed turning for medium carbon steel, the forming courses and characteristics of the microtopography and microstructure of the workpiece surface were analyzed.
根据对中碳钢所进行的高速车削实验的观察，对高速车削工件表面微观形貌和表层微观结构的形成过程及其特征进行了分析研究。 - The wear characteristics and mechanism of low carbon high alloy steel and medium carbon steel under impact-corrosion condition have been investigated.
在冲击腐蚀磨损条件下研究了中碳合金钢、低碳高合金钢磨损特性和机理。 - Study on Mold Powder for Medium Carbon Steel in Wide Slab Mold
宽板坯结晶器中碳钢保护渣研究 - Free-cutting Nb-V combined microalloyed medium carbon steel
易切削铌钒复合微合金中碳钢的研究 - This article introduces oxidizing decarbonization property of medium carbon steel with Si and Mn under different temperature conditions and studies the influence of cracks size on oxidizing decarbonization property.
介绍了不同温度条件下中碳硅锰钢的氧化脱碳性能，研究了裂纹尺寸大小对氧化脱碳性能的影响。 - The flaking cracks in medium carbon steel are initiated from surface layer.
中碳钢剥落裂纹起源于表面； - Study of austenite grain growth kinetics in medium carbon steel
中碳钢奥氏体晶粒生长动力学的研究 - The Effect of Medium Carbon Steel Wire Heat-treated and Drawed
中碳钢丝热处理工艺和拉拔工艺对其性能的影响 - A Research on Cracking of the Medium Carbon Steel Slab in Low Temperature
中碳钢连铸板坯低温开裂的研究 - Investigation on Rapid Spheroidization Annealing of Medium Carbon Steel
中碳钢快速球化退火工艺的研究 - Effect of Shot Peening on The Initiation and Propagation of Short Fatigue Cracks Form Surfaces In a Medium Carbon Steel
喷丸对中碳钢表面短裂纹萌生与扩展的影响 - Analyse the technical characteristics of cold roll forming of medium carbon steel and introduce the quality features of product.
分析中碳钢冷摆辗成形的技术特点，介绍产品质量特征。 - The high-strength bolt materials which contain medium carbon steel and medium carbon alloy steel with more perlite should be spheroidized before cold-headed to improve the cold workability, and the depth of the decarburized layer should be strictly controlled.
高强螺栓材料使用含珠光体较多的中碳钢和中碳合金钢时，在冷镦前要进行球化退火处理，来改善冷加工性能，并要严格控制脱碳层的深度。 - Influence of deformation temperature on the microstructure transformation in medium carbon steel
形变温度对中碳钢组织转变的影响